The following is an overview of the user manual for the Z-Wave product Xl1050 (TZON1050AC52ZAA)from Trane. To view other Z-Wave products and manuals from Trane follow that link.
Overview
Security
As a Z-Wave Plus certified product, Xl1050 supports Z-Wave S2 security. The following security modes are directly supported:
Features
Trane describes Xl1050 as having the following features:
- Communications Protocol
- Color
- Firmware updatable via a compatible Z-Wave gateway
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
From the HOME Screen, press MENU on the control, then press NEXIA.
Next press REMOVE DEVICE and follow the device manufacturer's instructions for setting the Z-Wave device into learn mode. You will have four minutes to set the device into learn mode after pressing the REMOVE DEVICE button.
From the HOME Screen, press MENU on the control, then press NEXIA.
Next press ADD DEVICE and follow the device manufacturer's instructions for setting the Z-Wave device into learn mode. You will have four minutes to set the device into learn mode after pressing the ADD DEVICE button.
Follow the device manufacturer's instructions of your primary controller for putting the controller into inclusion mode.
From the HOME Screen, press MENU on the control, then press NEXIA.
Press ADVANCED, then LEARN. Your XL1050 will be added to the network of your primary controller.
Factory reset Xl1050
From the HOME Screen, press MENU on the control, then press NEXIA.
Press ADVANCED, then FACTORY RESET.
If this bridge is being used as a secondary or inclusion controller in the network, please reset this bridge only in the event that the primary controller is missing or otherwise inoperable.
Please note that this is a user manual Xl1050 from Trane is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Xl1050 and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.