The following is an overview of the user manual for the Z-Wave product Advanced Smart Home Security Controller (VeraSecure - US)from Vera Control, Ltd.. To view other Z-Wave products and manuals from Vera Control follow that link.
Overview
Get The Security & Peace Of Mind…
• Of Never Arriving Home To A Dark House
o Automatically schedule your lights to turn on before you enter your home with a VeraSecure System.
• Of Being Sure When Your Kids Come Home
o Receive notifications automatically with your motion sensor & security camera connected to your VeraSecure System.
• Of Knowing Your Home Is Safe
o Cameras, sensors and siren ensure your home is being monitored from anywhere on your mobile device.
• Of Watching What Your Pet Is Up To
o With your VeraSecure System and security camera you can always ensure your pet is safe.
• Of Knowing You Are Saving Money
o By never wasting energy in your home with control of lighting, heating and cooling.
Get Maximum Compatibility & Performance
• Comprehensive wireless connectivity with Z-Wave, ZigBee, Bluetooth LE, VeraLink (433/345 Mhz), 802.11a/b/g/n/ac Wi-Fi
• 3G cellular connection keeps home protected even when Internet goes out
• Built-in backup battery protects home during power outages (4-8 hours)
• Built-in Siren for local alarm notification
• 2-Way audio for optional VeraProtect 24/7 alarm monitoring service
Security
As a Z-Wave Plus certified product, Advanced Smart Home Security Controller supports Z-Wave S2 security. The following security modes are directly supported:
Features
Vera Control describes Advanced Smart Home Security Controller as having the following features:
- Communications Connections
- Color
- Communications Protocol
- Firmware updatable via a compatible Z-Wave gateway
- Battery powered using Rechargable Li-on batteries
- Sensors
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To include a Z-Wave device into the Z-Wave network using the VeraSecure Controller, use the Vera Custom or Generic Device Wizard on the Vera Dashboard on the Web UI/App and follow the on- screen instructions.
During normal installation of Z-Wave devices you do NOT need to use the buttons on the Controller. The following are for manually starting Z-Wave Include Mode.
Press the Select button 2 times and then press the Sync button on the Controller. To exit the inclusion mode on the Controller, press and hold the Select button for 6 seconds.
To exclude a Z-Wave device from the Z-Wave network using the VeraSecure Controller, use the Vera Custom or Generic Device Wizard on the Vera Dashboard on the Web UI/App and follow the on- screen instructions.
During normal installation of Z-Wave devices you do NOT need to use the buttons on the Controller. The following are for manually starting Z-Wave Include Mode.
Press the Select button 2 times and then press the Sync button for at least 3 seconds and release.
Factory reset Advanced Smart Home Security Controller
If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
Reset to Network defaults - Press the Reset button 3 times in 6 seconds.
To reset the controller, press the Reset button 6 times in 6 seconds. This will reset it to factory default.
To include the Controller into an existing Z-Wave network, use the UI and follow the steps below.
Click on Settings -> Z-Wave Settings -> Advanced, select 'Copy Z-Wave network from a primary controller. This will shift the controller to have a secondary controller role and will receive data from the primary controller in the network.
Please note that this is a user manual Advanced Smart Home Security Controller from Vera Control, Ltd. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Advanced Smart Home Security Controller and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.