The following is an overview of the user manual for the Z-Wave product Smart Home Controller (VeraEdge-EU)from Vera Control, Ltd.. To view other Z-Wave products and manuals from Vera Control follow that link.
Overview
• One-touch control of your entire system
• View all your cameras and control all your devices from one easy app
• See and control your system from any smartphone or tablet from anywhere in the world (where there's Internet)
• Save money on energy, automatically!
• Expand your system to control over 220 devices (Z-Wave and Wi-Fi devices)
• Wireless communications makes installation a breeze in any home or small business
• Easy, intuitive setup with simple Q&A format; adding devices later is easy too with preconfigured settings for most devices
• No monthly fees required!
• Cutting edge features like geo fencing let the system know when you're coming home, automatically, when you leave, too!
• One easy, intuitive app spans all platforms (Mac/Window/iOS/Android) to easily keep you in control at all times, wherever you go.
• Controls all the leading brands of locks, thermostats, and other devices so you don't need to compromise when selecting components.
• More device compatibility—faster processor allows greater compatibility with devices
• More memory for better response times and flexibility
• WPS easy push button pairing for Wi-Fi devices
• Improved multi-camera management
• Intuitive user set up and control
• Local control of devices to avoid any latency or connectivity issues (works locally even when your Internet goes down)
Use VeraEdge for convenience, to save energy, and achieve the peace of mind of knowing your family is safe and your home or small business is alright—from anywhere in the world!
Security
As a Z-Wave Plus certified product, Smart Home Controller supports Z-Wave S2 security. The following security modes are directly supported:
Features
Vera Control describes Smart Home Controller as having the following features:
- Communications Protocol
- Firmware updatable via a compatible Z-Wave gateway
- Color
- Communications Connections
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To exclude a Z-Wave product into the network, you can use the UI
and follow the on- screen instructions that read as follows:
Navigate to the device -> Select the delete device option ->
Choose to un-pair and follow the instructions. [Attached images
along with the manual].
For an installer who wishes to manually exclude a Z-Wave product
from the network, hold the Sync button down for 3 seconds.
To include the controller into an existing Z-Wave network, use
the UI and follow the steps below.
Click on Settings -> Z-Wave Settings -> Advanced, select 'Copy
Z-Wave network from a primary controller. This will shift the
controller to have a secondary controller role and will receive
data from the primary controller in the network.
Factory reset Smart Home Controller
If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
To reset the controller, press the reset button for 20 seconds.
This will reset it to factory default.
To include a Z-Wave product into the network, you can use the UI
and follow the on- screen instructions that read as follows:
Select Add device -> Pick the device to be included in the
network from the list -> Follow the steps for inclusion of the
device -> Once the device is detected, save the name of the
device and the device completes the configuration process.
[Attached images along with the manual].
For an installer who wishes to carry out a manual setup of
devices, tap the Sync button on the controller. To exit the
inclusion mode on the controller, tap the Sync button again.
Please note that this is a user manual Smart Home Controller from Vera Control, Ltd. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Home Controller and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.