Vera Edge (VeraEdge-AU) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Vera Edge (VeraEdge-AU)from Vera Control, Ltd.. To view other Z-Wave products and manuals from Vera Control follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Vera Edge
SKU Code
VeraEdge: The Controller for Today's Expanding Smart Home Universe
• One-touch control of your entire system
• View all your cameras and control all your devices from one easy app
• See and control your system from any smartphone or tablet from anywhere in the world (where there's Internet)
• Save money on energy, automatically!
• Expand your system to control over 220 devices (Z-Wave and Wi-Fi devices)
• Wireless communications makes installation a breeze in any home or small business
• Easy, intuitive setup with simple Q&A format; adding devices later is easy too with preconfigured settings for most devices
• No monthly fees required!
• Cutting edge features like geo fencing let the system know when you're coming home, automatically, when you leave, too!
• One easy, intuitive app spans all platforms (Mac/Window/iOS/Android) to easily keep you in control at all times, wherever you go.
• Controls all the leading brands of locks, thermostats, and other devices so you don't need to compromise when selecting components.
• More device compatibility—faster processor allows greater compatibility with devices
• More memory for better response times and flexibility
• WPS easy push button pairing for Wi-Fi devices
• Improved multi-camera management
• Intuitive user set up and control
• Local control of devices to avoid any latency or connectivity issues (works locally even when your Internet goes down)
Use VeraEdge for convenience, to save energy, and achieve the peace of mind of knowing your family is safe and your home or small business is alright—from anywhere in the world!
Version #
HW: 4 FW: 4.05:03.07 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Vera Edge supports Z-Wave S2 security. The following security modes are directly supported:


    Vera Control describes Vera Edge as having the following features:

    • Communications Connections
    • Firmware updatable via a compatible Z-Wave gateway
    • Color
    • Communications Protocol
    • Sensors
    • Supported Notification Types
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    To exclude a Z-Wave product into the network, you can use the UI and follow the on- screen instructions that read as follows:
    Navigate to the device -> Select the remove device option -> Choose to un-pair and follow the instructions. [Attached images along with the manual].

    For an installer who wishes to manually exclude a Z-Wave product from the network, hold the Sync button down for 3 seconds.

    Factory reset Vera Edge

    If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.

    To reset the controller, press the reset button for 20 seconds. This will reset it to factory default.

    To include a Z-Wave product into the network, you can use the UI and follow the on- screen instructions that read as follows:
    Select Add device -> Pick the device to be included in the network from the list -> Follow the steps for inclusion of the device -> Once the device is detected, save the name of the device and the device completes the configuration process. [Attached images along with the manual].

    For an installer who wishes to carry out a manual setup of devices, tap the Sync button on the controller. To exit the inclusion mode on the controller, tap the Sync button again.

    To include the controller into an existing Z-Wave network, use the UI and follow the steps below.
    Click on Settings -> Z-Wave Settings -> Advanced, select 'Copy Z-Wave network from a primary controller. This will shift the controller to have a secondary controller role and will receive data from the primary controller in the network.

    Please note that this is a user manual Vera Edge from Vera Control, Ltd. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. only warrants and is only able to support products purchased directly from us. If you have Vera Edge and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.