Siren with DC adapter (ZM1602EU-5) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Siren with DC adapter (ZM1602EU-5)from Vision. To view other Z-Wave products and manuals from Vision follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Siren with DC adapter
SKU Code
ZM1602EU-5
Description
Features:

*Loud audible alarm>105dB@1 meter
*LED strobe lighting
*Low battery detection
*Siren for Battery Back-Up
*100ft line of sight
*LED Status Indicator
*Operating temp: -15oC~60oC
*Working Voltage: 6V
*Dimensions: 116*77*40mm

Version #
02 was the version certified
Certification #
ZC10-15050007
Certified
2015-04-29T08:57:50.4286
Z-Wave Version
6.51.06

Security

As a Z-Wave Plus certified product, Siren with DC adapter supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Vision describes Siren with DC adapter as having the following features:

    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZM 1602 to your controller. To get in the “inclusion” mode, the distance between siren and controller is suggested to be in one meter. Open the bracket and press the program switch of ZM 1602 for 1 second at least & release to be included. After setting, the LED Setting Lighting should go off,

    Set up the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZM 1602 from your controller. Press the Tamper Switch of ZM 1602 for 1 second at least & release to be excluded.

    removing the back cover of the ZM1602 to get into “Awake” mode,

    1. Support OTA firmware update from controller
    2. Support Explorer Frame function

    Please note that this is a user manual Siren with DC adapter from Vision is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Siren with DC adapter and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.