The following is an overview of the user manual for the Z-Wave product Wall Remote (ZT1141EU-5)from Vision. To view other Z-Wave products and manuals from Vision follow that link.
Overview
* Basic Set Mode: 4 buttons control 4 different groups.
* Central Scene Mode: 4 buttons control 4 different scenes.
* Support Shift Function to Primary Controller)
* Battery: CR2032 x 2
Security
As a Z-Wave Plus certified product, Wall Remote supports Z-Wave S2 security. The following security modes are directly supported:
Features
Vision describes Wall Remote as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To “Exclude” from (removing from) an existing network: Put the Z-Wave™ Gateway or Controller into learn mode to remove the Wall Remote from your controller. Press button 1 and 4 together till the red LED flashes to be excluded. ZT1141 will go to sleep if removing is not successfully within 5 seconds.
To “Include” into (adding into) an existing network: Put the Z-Wave™ Gateway or Controller into learn mode to add the Wall Remote into your controller. Press button 1 and 4 together till the red LED flashes to be included. ZT1141 will go to sleep if adding is not successfully within 5 seconds.
1) Include other devices into Wall Remote's network:
* Wall Remote must be primary controller
* Press I/E button until green LED flashes
* Wall Remote will go back to sleep if no node info received within 10 seconds.
2) Exclude other devices from Wall Remote's network:
* Wall Remote must be the primary controller
* Press I/E button until red LED flashes.
* Wall Remote will go back to sleep if no node info received within 10 seconds.
Factory reset Wall Remote
Press 4 buttons together for 10 seconds. The LED colors will turn red then turn green. (Green LED flashes 5 times quickly that means reset completely).
Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.
Please note that this is a user manual Wall Remote from Vision is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Wall Remote and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.