The following is an overview of the user manual for the Z-Wave product Wireless Siren & Strobe Alarm, Battery Type (ZM1601US-5)from Vision. To view other Z-Wave products and manuals from Vision follow that link.
Overview
*Loud audible alarm>105dB@1 meter
*LED strobe lighting
*Low battery detection
*Siren for Battery Back-Up
*100ft line of sight
*LED Status Indicator
*Operating temp: -15oC~60oC
*Working Voltage: 6V
*Dimensions: 116*77*40mm
Security
As a Z-Wave Plus certified product, Wireless Siren & Strobe Alarm, Battery Type supports Z-Wave S2 security. The following security modes are directly supported:
Features
Vision describes Wireless Siren & Strobe Alarm, Battery Type as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZM 1601 to your controller. To get in the “inclusion” mode, the distance between siren and controller is suggested to be in one meter. Open the bracket and press the program switch of ZM 1601 for 1 second at least & release to be included. After setting, the LED Setting Light should go off,
Set up the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZM 1601 from your controller. Press the program switch of ZM 1601 for 1 second at least & release to be excluded. After setting The LED setting light will flash again
removing the back cover of the ZM1601 to get into “Awake” mode
1. Support OTA firmware update from controller
2. Support Explorer Frame function
Please note that this is a user manual Wireless Siren & Strobe Alarm, Battery Type from Vision is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Wireless Siren & Strobe Alarm, Battery Type and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.