Z-Wave USB Dongle (ZU1401US-5) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Z-Wave USB Dongle (ZU1401US-5)from Vision. To view other Z-Wave products and manuals from Vision follow that link.

Overview
Security
Features
Installation instructions

Overview

Name

Z-Wave USB Dongle

SKU Code

ZU1401US-5

Description

Use this USB dongle to connect the computer for controlling the Z-Wave devices. Or you could use the USB dongle to connect with the control box which could be compatible with Z-Wave solution and reserved the USB port then you could control the Z-Wave devices as the gateway does. This Z-Wave+ Certified Hardware, when combined with a Z-Wave+ Application, provides an overall Z-Wave+ end user experience.

Version #

47771 was the version certified

Certification #

ZC10-15020005

Certified

2015-01-28T11:54:37.1152

Z-Wave Version

6.51.06

Security

As a Z-Wave Plus certified product, Z-Wave USB Dongle supports Z-Wave S2 security. The following security modes are directly supported:

Features

Vision describes Z-Wave USB Dongle as having the following features:

FLiRS capable
Supports Network Wide Inclusion
Supports Z-Wave Explorer Frames
Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

Installation instructions

N/A

Factory reset Z-Wave USB Dongle

N/A

Please note that this is a user manual Z-Wave USB Dongle from Vision is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave USB Dongle and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.

Categories