The following is an overview of the user manual for the Z-Wave product Rts-pz (9001)from Westinghouse. To view other Z-Wave products and manuals from Westinghouse follow that link.
Overview
Security
As a Z-Wave Plus certified product, Rts-pz supports Z-Wave S2 security. The following security modes are directly supported:
Features
Westinghouse describes Rts-pz as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To include our device into a controller.
1.Perform 'Include' on the controller.
2.From the lock's main menu item ""7.Zwave"", select the ""ZwaveInclusion"" by using the arrow keys to scroll to it and then pressing 'M' to select it. After a few seconds, you should see ""Success"" on the lock.
When accessing the lock simply press the # button to scan a fingerprint or enter your pincode directly then press the * button twice. To access the Main Menu press the M button on the inside unit. Any Z-wave communication will wake the unit and then execute any command from a paired controller.
To exclude our device from a controller .
1.Perform 'Exclude' on the controller.
2.From the lock's main menu item ""7.Zwave"", select the ""ZwaveExclusion"" option by using the arrow keeys to scroll to it and then pressing 'M' to sleect it. After a few seconds, you should see ""Success"" on the lock.
Factory reset Rts-pz
If your controller fails or is replaced or if you need to perform a Factory reset on the device so that an inclusion may be performed again or with a new controller, Factory reset can be done on the device by selecting ‘ Hard Reset’ from the Main Menu on device’s display and pressing the 'M' button. When prompted to reset press the 'M' button on the unit and the device will display initializing. Once the reset is complete the display will return to the Main Menu.
Note: When a Hard Reset is completed, the zwave node id is initialized to 0 and the device can't be controlled by zwave. In order to control the device again, the controller needs to include the device on zwave network.
• 1,000 user capacity
• Multi-modal options with Secure PIN Code and mechanical key
• Easy to read OLED screens
• Z-Wave Plus 5202 chipset with integrated Z-Wave controller
• Mesh network extends range of other devices
• Operate stand alone or integrate server side
• Capture, review, and transmit audit trail history
• IP56 tested and dust proof design
• Rugged, zinc cast enclosures
• MS1 is an optional management software tool that allows you to administer an unlimited number of locks
• FCC, CE, UL, ANSI, ROHS Certifications
• ISO/TS, 16949, ISO 9001, ISO 14001 Compliant
• 83% Made in America
• 2 year warranty from date of purchase
Please note that this is a user manual Rts-pz from Westinghouse is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Rts-pz and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.