The following is an overview of the user manual for the Z-Wave product Smart Plug (WSP)from Widom. To view other Z-Wave products and manuals from widom follow that link.
Overview
Alerts and visual feedback with RGB LED
An RGB LED on the device provides visual feedback for overvoltage and / or overcurrent and overpower detection.
Small size and innovative design
The WiDom Smart Plug has an elegant design and small size that allows a perfect integration in any home environment.
Monitoring of energy consumption
Within the WiDom Smart Plug is integrated a very precise energy consumption meter that allows you to monitor the consumption of the connected equipment.
Simplified device inclusion and exclusion
WiDom Smart Plug can be included in any Z-Wave network and work with Z-Wave devices from any other company. WiDom Smart Plug, used as a constantly powered node, will act as a signal repeater to increase network reliability. WiDom Smart Plug is compatible with all Z-Wave certified controllers.
Associations and Multiclick
WiDom Smart Plug can control, through association, other devices of the Z-Wave network in which is included, when an event of overcurrent, overvoltage or events on the Push Button occur. It is possible to activate a multiclick recognition, for example, you can check with a single click the load connected to the Smart Plug and double-click the associated devices.
Zero crossing - Contact protection technology
To reduce the electrical stress on the relay contacts and ensure a longer life, the open / closed switching of the device always occur when the instantaneous value of voltage is 0.
S2 Security
The Smart Roller Shutter uses a strong and secure S2 protection system, which provides advanced security features and eliminates the risk of hacking of devices.
Security
As a Z-Wave Plus certified product, Smart Plug supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Unauthenticated
Features
widom describes Smart Plug as having the following features:
- Switch Load Capacity Watts
- Switch Type
- Firmware updatable via a compatible Z-Wave gateway
- Supported Meter Type
- Switch Load Capacity Current
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Triple clicks on the integrated button.
As soon as the device has been removed form the network it will be reset to the factory setting.
Triple clicks on the integrated button
Please note that this is a user manual Smart Plug from Widom is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Smart Plug and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.