Xuan (STACK Box) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Xuan (STACK Box)from Xuan. To view other Z-Wave products and manuals from Xuan follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Xuan
SKU Code
STACK Box
Description
The STACK Box is a A Smart Home Controller. The STACK Box connects all your smart devices that control your homes lighting, energy, audio, video, security, healthcare and wearable's. The controller can be accessed locally and remotely with your smartphone and, or tablet.
Version #
1 was the version certified
Certification #
ZC10-14090011
Certified
2014-08-25T17:44:41.371392
Z-Wave Version
6.51.02

Security

As a Z-Wave Plus certified product, Xuan supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Xuan describes Xuan as having the following features:

    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    To remove the STACK Box from an existing Z-Wave Network as a secondary controller, follow the instructions in your primary controller's user manual to put the controller into exclusion mode, and then from the top level menu of the STACK Box web interface, select 'Learn' to initiate exclusion on the STACK Box.

    If the STACK Box is a primary controller, use the menu option ""Add"" from the top level menu of the STACK Box web interface to add any device or and secondary controller from the STACK Box Z-Wave network. Use the menu option ""Exclude"" from the top level menu of the STACK Box web interface to remove any device or and secondary controller from the STACK Box Z-Wave network.

    To add the STACK Box to an existing Z-Wave Network and use the STACK Box as a secondary controller, follow the instructions in your primary controller's user manual to put the controller into inclusion mode, and then from the top level menu of the STACK Box web interface, select 'Learn' to initiate inclusion on the STACK Box.

    Factory reset Xuan

    Use this procedure only in the event that the network primary controller is lost or otherwise inoperable.

    At the back of the box, look for ""Reset"" mark. Use a sharp pin to press inside the hole above the mark for more than 4s.

    N/A

    N/A

    Please note that this is a user manual Xuan from Xuan is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Xuan and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.