Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Assure 2 Lock SL Key Free Keypad (YRD430-ZW2) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Assure 2 Lock SL Key Free Keypad (YRD430-ZW2)from Yale Locks & Hardware. To view other Z-Wave products and manuals from Yale follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Yale Assure 2 Lock SL Key Free Keypad
SKU Code
YRD430-ZW2
Description
Never worry about carrying around or losing your keys again. The Assure Lock SL features Z-Wave™ and seamlessly integrates into 50+ home automation and security systems including SmartThings, Alarm.com, Honeywell, ADT, Wink and more! When added to most Z-Wave™ automation systems, lock and unlock your door, create pin codes, view access history and receive notifications from anywhere.
Version #
HW: 255 FW: 1.78:12.05 was the version certified
Certification #
ZC10-22067105
Certified
2022-06-08T14:31:03.586563
Z-Wave Version
6.51.07

Security

As a Z-Wave Plus certified product, Assure 2 Lock SL Key Free Keypad supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Yale describes Assure 2 Lock SL Key Free Keypad as having the following features:

    • Battery Quantity
    • Battery powered using batteries
    • Door Lock Type
    • Firmware updatable via a compatible Z-Wave gateway
    • Outdoor Use
    • Supported Notification Types
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 1 key followed by the gear key.

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 3 key followed by the gear key.

    Press the Yale logo to wake up

    Factory reset Assure 2 Lock SL Key Free Keypad

    Please use this procedure only when the network primary controller is missing or otherwise inoperable.
    1. Remove the inside lever with the lever removal tool.
    2. Remove battery cover using hex wrench provided with lock.
    3. Remove four (4) AA batteries.
    4. Remove the 10-32 x 3/4"" pan head screw from the center of the battery housing into the barrel nut of the outside assembly.
    5. Remove inside escutcheon. Cables may stay connected.
    6. Reinstall batteries
    7. On the back of the PC board, push and hold the Reset Button with the lever removal tool for 3 seconds.
    8. While continuing the press the reset button, temporarily remove one AA battery.
    9. Reinstall the battery
    10. Release reset button and wait 15 seconds. Speaker will announce ""Welcome to Yale""
    11. Reassemble escutcheon

    Please note that this is a user manual Assure 2 Lock SL Key Free Keypad from Yale Locks & Hardware is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Assure 2 Lock SL Key Free Keypad and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.