Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Assure Key Free Lever Keypad with Z-Wave Plus (YRL236-ZW2) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Assure Key Free Lever Keypad with Z-Wave Plus (YRL236-ZW2)from Yale Locks & Hardware. To view other Z-Wave products and manuals from Yale follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Assure Key Free Lever Keypad with Z-Wave Plus
SKU Code
YRL236-ZW2
Description
Never worry about carrying around or losing your keys again. Unlock and lock your home with ease from the backlit touchscreen keypad. Create unique pin codes for friends and family and remove codes whenever you need to. This Yale Real Living lock features Z-Wave technology and seamlessly integrates into 50+ home automation and security systems. When added to most Z-Wave automation systems, lock and unlock your door, create pin codes, view access history and receive notifications from anywhere. The lock is tamper resistant, easy to install and even easier to use!
Version #
HW: 255 FW: 1.78:28.00 was the version certified
Certification #
ZC10-19036408
Certified
2019-03-26T15:50:38.245748
Z-Wave Version
6.51.07

Security

As a Z-Wave Plus certified product, Assure Key Free Lever Keypad with Z-Wave Plus supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Yale describes Assure Key Free Lever Keypad with Z-Wave Plus as having the following features:

    • Battery powered using AA batteries
    • Door Lock Type
    • Firmware updatable via a compatible Z-Wave gateway
    • Outdoor Use
    • Supported Notification Types
    • Battery Quantity
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 1 key followed by the gear key.

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 3 key followed by the gear key.

    Factory reset Assure Key Free Lever Keypad with Z-Wave Plus

    Please use this procedure only when the network primary controller is missing or otherwise inoperable.
    1. Remove the inside lever with the lever removal tool.
    2. Remove battery cover using hex wrench provided with lock.
    3. Remove four (4) AA batteries.
    4. Remove the 10-32 x 3/4"" pan head screw from the center of the battery housing into the barrel nut of the outside assembly.
    5. Remove inside escutcheon. Cables may stay connected.
    6. Reinstall batteries
    7. On the back of the PC board, push and hold the Reset Button with the lever removal tool for 3 seconds.
    8. While continuing the press the reset button, temporarily remove one AA battery.
    9. Reinstall the battery
    10. Release reset button and wait 15 seconds. Speaker will announce ""Welcome to Yale""
    11. Reassemble escutcheon

    Please note that this is a user manual Assure Key Free Lever Keypad with Z-Wave Plus from Yale Locks & Hardware is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Assure Key Free Lever Keypad with Z-Wave Plus and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.