Assure Lock for Andersen Patio Doors with Bluetooth (YRM476-ZW2) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Assure Lock for Andersen Patio Doors with Bluetooth (YRM476-ZW2)from Yale. To view other Z-Wave products and manuals from Yale follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Yale Assure Lock for Andersen Patio Doors with Bluetooth
SKU Code
YRM476-ZW2
Description
Yale Assure Lock® is a secure, keyless lock developed by Yale exclusively available with Andersen Patio Doors (E-Series and A-Series hinged patio doors). Monitor, lock and unlock from anywhere with your Yale Assure Lock featuring Andersen’s VeriLock™ sensor technology and with Z-Wave integrate into a compatible home automation or security system. Includes Bluetooth® technology for keyless unlocking.
Version #
HW: 255 FW: 1.78:29.00 was the version certified
Certification #
ZC10-18056103
Certified
2018-05-01T21:24:59.155345
Z-Wave Version
6.51.07

Security

As a Z-Wave Plus certified product, Assure Lock for Andersen Patio Doors with Bluetooth supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Yale describes Assure Lock for Andersen Patio Doors with Bluetooth as having the following features:

    • Battery Quantity
    • Battery powered using AA batteries
    • Door Lock Type
    • Firmware updatable via a compatible Z-Wave gateway
    • Outdoor Use
    • Sensors
    • Supported Notification Types
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 1 key followed by the gear key.

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 3 key followed by the gear key.

    Factory reset Assure Lock for Andersen Patio Doors with Bluetooth

    Please use this procedure only when the network primary controller is missing or otherwise inoperable.
    When resetting the lock, all user codes,including the Master code*, are deleted. All programming features are reset to the original default settings.
    1. Remove the battery cover and batteries.
    2. Remove the interior lock to access the reset button.
    3. The reset button is located above the cable connectors. PCB
    4. Re-insert 3 batteries and hold the reset button for 3 seconds.
    5. While still holding the reset button, insert the 4th battery, and hold the reset button for an additional 3 seconds.
    6. Release the reset button.
    7. Re-install the interior lock onto the door.Upon reset, Master Code creation is the PIN only option available and must be performed prior to any other programming of the lock.
    For best results, the lock should be installed on the door when resetting the lock to factory default. If the process was done and the lock was not installed on the door, review the Re-Handing instructions listed in Hardware Troubleshooting.

    Please note that this is a user manual Assure Lock for Andersen Patio Doors with Bluetooth from Yale is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Assure Lock for Andersen Patio Doors with Bluetooth and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.