The following is an overview of the user manual for the Z-Wave product Assure Lock for Andersen Patio Doors (YRM276-ZW2)from Yale. To view other Z-Wave products and manuals from Yale follow that link.
Overview
Yale nexTouch offers many benefits for the small business owner, including easy management of employee access rights and attendance, seeing to unattended deliveries, monitoring of business hours, managing remote locations, and increased security. Lock features may vary based on the chosen integration system, but typically include accommodation of up to 500 users, real-time notifications, audit trail, scheduling of access rights and remote access. To meet small business security needs Yale nexTouch locks are ANSI/BHMA Grade 1 certified, UL listed for use on fire doors and windstorm listed. The product is designed for standard commercial doors, ideal for employee, delivery or back entrances. The lock is available with a backlit push button or touchscreen keypad, the latter offering low battery and tamper alarm indicators on the device.
Security
As a Z-Wave Plus certified product, Assure Lock for Andersen Patio Doors supports Z-Wave S2 security. The following security modes are directly supported:
Features
Yale describes Assure Lock for Andersen Patio Doors as having the following features:
- Outdoor Use
- Supported Notification Types
- Battery Quantity
- Battery powered using AA batteries
- Firmware updatable via a compatible Z-Wave gateway
- Sensors
- Door Lock Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Enter the 4-8 digit master PIN code followed by the gear key.
2. Press the 7 key followed by the gear key.
3. Press the 3 key followed by the gear key.
1. Enter the 4-8 digit master PIN code followed by the gear key.
2. Press the 7 key followed by the gear key.
3. Press the 1 key followed by the gear key.
Factory reset Assure Lock for Andersen Patio Doors
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
When resetting the lock, all user codes,including the Master code*, are deleted. All programming features are reset to the original default settings.
1. Remove the battery cover and batteries.
2. Remove the interior lock to access the reset button.
3. The reset button is located above the cable connectors. PCB
4. Re-insert 3 batteries and hold the reset button for 3 seconds.
5. While still holding the reset button, insert the 4th battery, and hold the reset button for an additional 3 seconds.
6. Release the reset button.
7. Re-install the interior lock onto the door.Upon reset, Master Code creation is the PIN only option available and must be performed prior to any other programming of the lock.
For best results, the lock should be installed on the door when resetting the lock to factory default. If the process was done and the lock was not installed on the door, review the Re-Handing instructions listed in Hardware Troubleshooting.
Please note that this is a user manual Assure Lock for Andersen Patio Doors from Yale is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Assure Lock for Andersen Patio Doors and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.