Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Assure Lock Touchscreen Deadbolt (YRD620-ZW2) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Assure Lock Touchscreen Deadbolt (YRD620-ZW2)from Yale Locks & Hardware. To view other Z-Wave products and manuals from Yale follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Yale Assure Lock Touchscreen Deadbolt
SKU Code
YRD620-ZW2
Description
Never worry about carrying around or losing your keys again. Unlock and lock your home with ease from the backlit touchscreen keypad. Create unique pin codes for friends and family and remove codes whenever you need to. This Yale Real Living lock features Z-Wave technology and seamlessly integrates into 50+ home automation and security systems. When added to most Z-Wave automation systems, lock and unlock your door, create pin codes, view access history and receive notifications from anywhere. The lock is tamper resistant, easy to install and even easier to use!
Version #
HW: 255 FW: 1.78:24.00 was the version certified
Certification #
ZC10-19066547
Certified
2019-06-17T20:11:30.876996
Z-Wave Version
6.51.07

Security

As a Z-Wave Plus certified product, Assure Lock Touchscreen Deadbolt supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Yale describes Assure Lock Touchscreen Deadbolt as having the following features:

    • Sensors
    • Outdoor Use
    • Battery Quantity
    • Battery powered using AA batteries
    • Door Lock Type
    • Firmware updatable via a compatible Z-Wave gateway
    • IP (Ingress Protection) Rated
    • Supported Notification Types
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Enter the 4-8 master Pin code followed by the gear key.
    Press the 7 key followed by the gear key
    Press the 1 key followed by the gear key

    Enter the 4-8 digit master pin code followed by the gear key
    Press the 7 key followed by the gear key
    Press the 3 key followed by the gear key

    Factory reset Assure Lock Touchscreen Deadbolt

    Remove the battery cover and batteries.
    Remove the interior escutcheon to access the reset button.
    The reset button is located above the PCB cable connector.
    While pressing the reset button for a minimum of 3 seconds, reinstall batteries. Release reset button.
    Replace battery cover.
    Please use this procedure only when the network primary controller is missing or otherwise inoperable

    Please note that this is a user manual Assure Lock Touchscreen Deadbolt from Yale Locks & Hardware is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Assure Lock Touchscreen Deadbolt and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.