Assure Lock Touchscreen Deadbolt (YRD622-ZW2) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Assure Lock Touchscreen Deadbolt (YRD622-ZW2)from Yale Locks & Hardware. To view other Z-Wave products and manuals from Yale follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Yale Assure Lock Touchscreen Deadbolt
SKU Code
YRD622-ZW2
Description
Never worry about carrying around or losing your keys again. Unlock and lock your home with ease from the backlit touchscreen keypad. Create unique pin codes for friends and family and remove codes whenever you need to. This Yale Real Living lock features Z-Wave Plus™ technology and seamlessly integrates into 50+ home automation and security systems. When added to most Z-Wave Plus™ automation systems, lock and unlock your door, create pin codes, view access history and receive notifications from anywhere. The lock is tamper resistant, easy to install and even easier to use!
Version #
HW: 255 FW: 1.78:32.33 was the version certified
Certification #
ZC10-22067088
Certified
2022-06-06T18:29:55.473499
Z-Wave Version
6.51.07

Security

As a Z-Wave Plus certified product, Assure Lock Touchscreen Deadbolt supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Yale describes Assure Lock Touchscreen Deadbolt as having the following features:

    • Battery powered using batteries
    • IP (Ingress Protection) Rated
    • Supported Notification Types
    • Outdoor Use
    • Sensors
    • Door Lock Type
    • Firmware updatable via a compatible Z-Wave gateway
    • Battery Quantity
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Enter the 4-8 master Pin code followed by the gear key.
    Press the 7 key followed by the gear key
    Press the 1 key followed by the gear key

    Enter the 4-8 digit master pin code followed by the gear key
    Press the 7 key followed by the gear key
    Press the 3 key followed by the gear key

    Factory reset Assure Lock Touchscreen Deadbolt

    Remove the battery cover and batteries.
    Remove the interior escutcheon to access the reset button.
    The reset button is located above the PCB cable connector.
    While pressing the reset button for a minimum of 3 seconds, reinstall batteries. Release reset button.
    Replace battery cover.
    Please use this procedure only when the network primary controller is missing or otherwise inoperable

    Press the Yale logo to wake the lock.
    You will be guided through setup by
    audio instructions on the lock.
    Additional entry codes and further
    programming can be done through
    the Settings Menu. Refer to page 19
    for YRD226 or page 20 for
    YRD620/YRD622.

    Please note that this is a user manual Assure Lock Touchscreen Deadbolt from Yale Locks & Hardware is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Assure Lock Touchscreen Deadbolt and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.