The following is an overview of the user manual for the Z-Wave product Conexis L1 (SD-L1000-CH)from Yale. To view other Z-Wave products and manuals from Yale follow that link.
Overview
Control Via Smartphone - Configure, Control and unlock your Smart Door Lock from your smartphone via our secure Bluetooth App.
Keyless - Say goodbye to keys, Open your Smart Door lock via your smartphone, Key Card or Key Tag.
Simple to Fit - Engineered for easy installation.
Connectivity - Compatible with the Yale Smart Home system. (Yale module sold separately)
Security as standard - Built in tamper alarm, PAS24 accredited.
Battery Operated - Powered by 4 AA batteries and a warning when they're running low.
Battery Backup - A 9v battery connection port can be used to power the Smart door lock in the event of flat batteries.
Secure Push & Turn Thumbturn - Engineered to give additional convenience and security to your door
Security
As a Z-Wave Plus certified product, Conexis L1 supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
Features
Yale describes Conexis L1 as having the following features:
- Firmware updatable via a compatible Z-Wave gateway
- Battery Quantity
- Battery powered using AA batteries
- Color
- IP (Ingress Protection) Rated
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Put the Z-Wave controller into add or learn mode
Press the R button on the lock 3 times quickly (within 1.5 seconds)
Refer to the operation manual of the Z-Wave controller to complete the learn in process
For more information on this please visit:
www.yale.co.uk/smart-living
Factory reset Conexis L1
Only use this when the existing Z-Wave controller is missing or inoperable
Lift up the lever handle
While holding the handle up, press the R button 3 times within 1.5 seconds
Put the existing Z-Wave controller into Remove Mode
Press the R button on the lock 3 times quickly (within 1.5 secs)
The lock is now ready to be added to a new Z-Wave controller
For more information on this please visit:
www.yale.co.uk/smart-living
Please note that this is a user manual Conexis L1 from Yale is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Conexis L1 and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.