The following is an overview of the user manual for the Z-Wave product Digital Door Lock (YDM3109+)from Yale. To view other Z-Wave products and manuals from Yale follow that link.
Overview
Manufacturer: iRevo, ASSA ABLOY
Combining high security with cutting edge technology, the Yale 3109+ Digital Door Lock is a high quality Security solution for the contemporary home.
Suitable for both timber and aluminium applications, the Yale 3109+ Digital Door Lock can be used with PIN code, proximity cards or key.
There are also a range of accessories available for easy, keyfree access to your home.
Touch Screen Proximity Card Digital Lock (Mortise Lock)
1. Access solutions
- Cards : 4 (Up to 40 Cards)
- Pin code : 4-10 digits
- Mechanical keys : 2
2. Product Key Features
- Smart Touchpad
- Various Access
- Operation Status Notification
- Mechanical Key Override
- Missing Card Key Invalidation
- Automatic Locking
- Anti-Panic Egress with Safe Handle
- Alarm (Break / Damage)
- Low Battery Alarm and Emergency Power Supply Terminal
3. Technical
- Front Body : 27(D) X 68.8(W) X 306.6(H) mm
- Back Body : 377(D) X 72.8(W) X 306.6(H) mm
Security
As a Z-Wave Plus certified product, Digital Door Lock supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
Features
Yale describes Digital Door Lock as having the following features:
- Battery Quantity
- Battery powered using AA batteries
- Color
- Communications Connections
- Door Lock Type
- Gateway Has Preferred Partners
- Supported Notification Types
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To include:
1. Touch keypad with palm
2. Enter User code(Normal Mode only. Enter Master code if operating Master Mode.)
3. Press 'I' button [Registration] from the inside of battery cover.
4. Press 9,#,1,# on the keypad (by sequence)
5. Wait until 'Ding dong dang' melody play then press 'I' button
To exclude:
1. Touch keypad with palm
2. Enter User code(Normal Mode only. Enter Master code if operating Master Mode.)
3. Press 'I' button [Registration] from the inside of battery cover.
4. Press 9,#,3,# on the keypad (by sequence)
5. Wait until 'Ding dong dang' melody play then press 'I' button
The lock is always in 'Wake up status'.
However, touch with palm to begin and end action.
Factory reset Digital Door Lock
To reset to factory defaults:
※ Use this procedure only in the event that the network primary controller is missing or otherwise inoperable. (User code or master code remains the same. Only network settings reset to factory defaults.)
1. Touch keypad with palm
2. Enter User code(Normal Mode only. Enter Master code if operating Master Mode.)
3. Press 'I' button [Registration] from the inside of battery cover.
4. Press 9,#,9,# on the keypad (by sequence)
5. Wait until 'Ding dong dang' melody play then press 'I' button
Please note that this is a user manual Digital Door Lock from Yale is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Digital Door Lock and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.