The following is an overview of the user manual for the Z-Wave product Digital Door Lock (YDM4109+)from Yale. To view other Z-Wave products and manuals from Yale follow that link.
Overview
Manufacturer: iRevo, ASSA ABLOY
The Yale Digital Door Lock Collection, Smarter Solution for your home, High tech Fingerprint Digital Door Lock with strong features
Features:
One touch Fingerprint Verification Method (Progressive Scan)
Automatic Locking
Voice Guide Feature
Smart Touchpad
Scramble code
Emergency Mechanical Key
Anti-panic egress with Safe handle
Automatic Alarm (Break-in/Damage)
Low-battery alarm and emergency power supply terminal
Technical details:
Mortise Lock Type
Fingerprint: Up to 20
Mechanical Keys: 2 Keys
Pin Code: 6-12 digits
Colour: Black
Outside Trim Dimensions : 28.5mm X 68.6mm X 320.7mm
Thickness : Suitable for 40-80mm thick wooden doors
Backset : 60mm
Security
As a Z-Wave Plus certified product, Digital Door Lock supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
Features
Yale describes Digital Door Lock as having the following features:
- Communications Connections
- Door Lock Type
- Color
- Battery powered using AA batteries
- Battery Quantity
- Supported Notification Types
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To include:
1. Touch keypad with palm
2. Enter User code(Normal Mode only. Enter Master code if operating Master Mode.)
3. Press 'I' button [Registration] from the inside of battery cover.
4. Press 9,#,1,# on the keypad (by sequence)
5. Wait until 'Ding dong dang' melody play then press 'I' button
To exclude:
1. Touch keypad with palm
2. Enter User code(Normal Mode only. Enter Master code if operating Master Mode.)
3. Press 'I' button [Registration] from the inside of battery cover.
4. Press 9,#,3,# on the keypad (by sequence)
5. Wait until 'Ding dong dang' melody play then press 'I' button
Factory reset Digital Door Lock
To reset to factory defaults:
※ Please use this procedure only when the network primary controller is missing or otherwise inoperable. (User code or master code remains the same. Only network settings reset to factory defaults.)
1. Touch keypad with palm
2. Enter User code(Normal Mode only. Enter Master code if operating Master Mode.)
3. Press 'I' button [Registration] from the inside of battery cover.
4. Press 9,#,9,# on the keypad (by sequence)
5. Wait until 'Ding dong dang' melody play then press 'I' button
The lock is always in 'Wake up status'.
However, touch with palm to begin and end action.
Please note that this is a user manual Digital Door Lock from Yale is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Digital Door Lock and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.