The following is an overview of the user manual for the Z-Wave product Keyless Connected (YD-01-CON)from Yale. To view other Z-Wave products and manuals from Yale follow that link.
Overview
Features
Replaces existing rim cylinder used on a 60mm backset nightlatch
Touchscreen with backlit keypad
Battery operated
Low battery indicator with emergency battery connection
User codes and settings remain if batteries are replaced
3 minute lock out if code is entered incorrectly 5 times
Tamper alarm
For use on timber doors
2 year guarantee
Security
As a Z-Wave Plus certified product, Keyless Connected supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
Features
Yale describes Keyless Connected as having the following features:
- Battery powered using AA batteries
- Battery Quantity
- IP (Ingress Protection) Rated
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Put the Z-Wave controller into add mode
Enter the Master code on the lock, followed by #
Press the 4 button, followed by #
Press the 1 button followed by #
Refer to the operation manual of the Z-Wave controller to complete the add/inclusion process
For more information on this please visit:
www.yale.co.uk/smart-living
Put the Z-Wave controller into remove mode
Enter the Master code on the lock, followed by #
Press the 4 button, followed by #
Press the 3 button followed by #
Refer to the operation manual of the Z-Wave controller to complete the remove/exclusion process
For more information on this please visit:
www.yale.co.uk/smart-living
Factory reset Keyless Connected
Enter the Master code on the lock, followed by #
Press the 4 button, followed by #
Press the 0 button followed by #
Please use this procedure only when the network controller is missing or inoperable
Please note that this is a user manual Keyless Connected from Yale is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Keyless Connected and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.