ProSL Key Free Keypad Deadbolt with Z-Wave Plus (YRD136-ZW2) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product ProSL Key Free Keypad Deadbolt with Z-Wave Plus (YRD136-ZW2)from Yale Locks & Hardware. To view other Z-Wave products and manuals from Yale follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Yale ProSL Key Free Keypad Deadbolt with Z-Wave Plus
SKU Code
YRD136-ZW2
Description
Never worry about the hassle of carrying around or losing your keys again. Lock and unlock your home with ease from the back-lit keypad. Create unique entry codes for friends, family, service providers, and renters. The YRD136 has Z-Wave Plus built in so you can easily integrate it into a compatible smart home or alarm system with one-touch enrollment.
Version #
HW: 255 FW: 1.78:29.06 was the version certified
Certification #
ZC10-19066564
Certified
2019-06-25T20:19:38.702578
Z-Wave Version
6.51.07

Security

As a Z-Wave Plus certified product, ProSL Key Free Keypad Deadbolt with Z-Wave Plus supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Yale describes ProSL Key Free Keypad Deadbolt with Z-Wave Plus as having the following features:

    • Battery Quantity
    • Battery powered using AA batteries
    • Supported Notification Types
    • Outdoor Use
    • Firmware updatable via a compatible Z-Wave gateway
    • Door Lock Type
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Factory reset ProSL Key Free Keypad Deadbolt with Z-Wave Plus

    Please use this procedure only when the network primary controller is missing or otherwise inoperable.
    1. Remove the inside lever with the lever removal tool.
    2. Remove battery cover using hex wrench provided with lock.
    3. Remove four (4) AA batteries.
    4. Remove the 10-32 x 3/4"" pan head screw from the center of the battery housing into the barrel nut of the outside assembly.
    5. Remove inside escutcheon. Cables may stay connected.
    6. Reinstall batteries
    7. On the back of the PC board, push and hold the Reset Button with the lever removal tool for 3 seconds.
    8. While continuing the press the reset button, temporarily remove one AA battery.
    9. Reinstall the battery
    10. Release reset button and wait 15 seconds. Speaker will announce ""Welcome to Yale""
    11. Reassemble escutcheon

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 1 key followed by the gear key.

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 3 key followed by the gear key.

    Please note that this is a user manual ProSL Key Free Keypad Deadbolt with Z-Wave Plus from Yale Locks & Hardware is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have ProSL Key Free Keypad Deadbolt with Z-Wave Plus and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.