Real Living Assure Lock Interconnected Z-Wave Enabled Key Free Touch Screen Deadbolt (YRC246-ZW2) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Real Living Assure Lock Interconnected Z-Wave Enabled Key Free Touch Screen Deadbolt (YRC246-ZW2)from Yale. To view other Z-Wave products and manuals from Yale follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Yale Real Living® Assure Lock™ Interconnected Z-Wave Enabled Key Free Touch Screen Deadbolt
SKU Code
YRC246-ZW2
Description
Yale Real Living® Assure Lock™ Interconnect combines electronic deadbolts with the convenience of a passage lever for panic proof egress. From the inside, both the latchbolt and the deadbolt are retracted simultaneously in a single motion for a quick and easy exit. Ships with Z-Wave Plus Smart Module.
Version #
HW: 255 FW: 1.78:43.00 was the version certified
Certification #
ZC10-19066546
Certified
2019-06-17T20:11:04.033858
Z-Wave Version
6.51.07

Security

As a Z-Wave Plus certified product, Real Living Assure Lock Interconnected Z-Wave Enabled Key Free Touch Screen Deadbolt supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Yale describes Real Living Assure Lock Interconnected Z-Wave Enabled Key Free Touch Screen Deadbolt as having the following features:

    • Door Lock Type
    • Battery powered using AA batteries
    • Firmware updatable via a compatible Z-Wave gateway
    • IP (Ingress Protection) Rated
    • Outdoor Use
    • Supported Notification Types
    • Battery Quantity
    • Sensors
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Enter the 4-8 master Pin code followed by the gear key.
    Press the 7 key followed by the gear key
    Press the 1 key followed by the gear key

    Enter the 4-8 digit master pin code followed by the gear key
    Press the 7 key followed by the gear key
    Press the 3 key followed by the gear key

    Factory reset Real Living Assure Lock Interconnected Z-Wave Enabled Key Free Touch Screen Deadbolt

    Remove the battery cover and batteries.
    Remove the interior escutcheon to access the reset button.
    The reset button is located above the PCB cable connector.
    While pressing the reset button for a minimum of 3 seconds, reinstall batteries. Release reset button.
    Replace battery cover.
    Please use this procedure only when the network primary controller is missing or otherwise inoperable

    Please note that this is a user manual Real Living Assure Lock Interconnected Z-Wave Enabled Key Free Touch Screen Deadbolt from Yale is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Real Living Assure Lock Interconnected Z-Wave Enabled Key Free Touch Screen Deadbolt and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.