The following is an overview of the user manual for the Z-Wave product Real Living Assure Lock Z-Wave Enabled Push Button Deadbolt (NF-YRD612-ZW3)from Yale. To view other Z-Wave products and manuals from Yale follow that link.
Overview
Security
As a Z-Wave Plus certified product, Real Living Assure Lock Z-Wave Enabled Push Button Deadbolt supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Access Control
Features
Yale describes Real Living Assure Lock Z-Wave Enabled Push Button Deadbolt as having the following features:
- Door Lock Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
press any key
Factory reset Real Living Assure Lock Z-Wave Enabled Push Button Deadbolt
When lock is reset to factory defaults all Entry Codes
(including the Master Entry Code*) are deleted and all
programming features are reset to original default
settings (see below).
1. Remove battery cover and batteries.
2. Remove inside lock to access reset button.
3. Reset button (see image at right) is located beside
cable adapter.
4. While pressing reset button reinstall batteries. Hold
reset button a minimum of 3 seconds then release.
5. Replace battery cover.
After reset, Master Entry Code creation is the only
option available and must be performed prior to
any other programming of the lock
Please note that this is a user manual Real Living Assure Lock Z-Wave Enabled Push Button Deadbolt from Yale is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Real Living Assure Lock Z-Wave Enabled Push Button Deadbolt and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.