Categories

Aeotec

Atrim

SmartThings

Z-Wave Products

Real Living Push Button Assure Lock with Z-Wave (YRD216-ZW2) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Real Living Push Button Assure Lock with Z-Wave (YRD216-ZW2)from Yale Locks & Hardware. To view other Z-Wave products and manuals from Yale follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions

Overview

Name
Yale Real Living Push Button Assure Lock with Z-Wave
SKU Code
YRD216-ZW2
Description
Never worry about carrying around or losing your keys again. Unlock and lock your home with ease from the backlit push button keypad. Create unique pin codes for friends and family and remove codes whenever you need to. This Yale Real Living lock features Z-Wave technology and seamlessly integrates into 50+ home automation and security systems. When added to most Z-Wave automation systems, lock and unlock your door, create pin codes, view access history and receive notifications from anywhere. The lock is tamper resistant, easy to install and even easier to use!
Version #
HW: 1 FW: 1.63:02.02 was the version certified
Certification #
ZC10-16095227
Certified
2016-09-07T16:30:49.3466
Z-Wave Version
6.51.07

Security

As a Z-Wave Plus certified product, Real Living Push Button Assure Lock with Z-Wave supports Z-Wave S2 security. The following security modes are directly supported:

    Features

    Yale describes Real Living Push Button Assure Lock with Z-Wave as having the following features:

    • Battery Quantity
    • Battery powered using AA batteries
    • Door Lock Type
    • Firmware updatable via a compatible Z-Wave gateway
    • Outdoor Use
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 1 key followed by the gear key.

    1. Enter the 4-8 digit master PIN code followed by the gear key.
    2. Press the 7 key followed by the gear key.
    3. Press the 3 key followed by the gear key.

    Factory reset Real Living Push Button Assure Lock with Z-Wave

    Please use this procedure only when the network primary controller is missing or otherwise inoperable.
    1. Remove the inside lever with the lever removal tool.
    2. Remove battery cover using hex wrench provided with lock.
    3. Remove four (4) AA batteries.
    4. Remove the 10-32 x 3/4"" pan head screw from the center of the battery housing into the barrel nut of the outside assembly.
    5. Remove inside escutcheon. Cables may stay connected.
    6. Reinstall batteries
    7. On the back of the PC board, push and hold the Reset Button with the lever removal tool for 3 seconds.
    8. While continuing the press the reset button, temporarily remove one AA battery.
    9. Reinstall the battery
    10. Release reset button and wait 15 seconds. Speaker will announce ""Welcome to Yale""
    11. Reassemble escutcheon

    Please note that this is a user manual Real Living Push Button Assure Lock with Z-Wave from Yale Locks & Hardware is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Real Living Push Button Assure Lock with Z-Wave and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.