The following is an overview of the user manual for the Z-Wave product Razberry500 (ZME_RAZ5)from Z-Wave.Me. To view other Z-Wave products and manuals from Z-Wave.Me follow that link.
Overview
The RaZberry consists of various parts:
(a) Z-Wave transceiver pluggable to the GPIO interface of the Raspberry PI,
(b) A Z-Wave stack integrated into an open source Javascript based smart home
automation engine
(c) Various user interfaces including an AJAX based Web UI, Apple HomeKit server
and several IOS and Android Apps.
Security
As a Z-Wave Plus certified product, Razberry500 supports Z-Wave S2 security. The following security modes are directly supported:
Features
Z-Wave.Me describes Razberry500 as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Web Interface; Network Tab, ""Exclude Device""
Web Interface; Network Tab, ""Include Device""
n/a
Factory reset Razberry500
Web Interface; Network Tab, ""Reset Controller""
Web Interface; Network Tab, ""Learn""
Please note that this is a user manual Razberry500 from Z-Wave.Me is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Razberry500 and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.