The following is an overview of the user manual for the Z-Wave product Z-Weather (ZWeather)from Z-Wave.Me. To view other Z-Wave products and manuals from Z-Wave.Me follow that link.
Overview
Z-Weather is powered by a solar cell and stores energy on an internal capacitor, enabling continuous operation, even with no wind for a couple of days. It does not use any batteries and is completely maintenance free. Using the built-in solar cell it also measures the ambient light and the solar yield. This information can be used to turn on the outdoor light at dusk time and turn the light off in the morning.
Z-Weather‘s wind yield and solar yield metering can be used as a calculation base for planning a wind generator or a solar panel on the roof of a house.
Security
As a Z-Wave Plus certified product, Z-Weather supports Z-Wave S2 security. The following security modes are directly supported:
Features
Z-Wave.Me describes Z-Weather as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Factory reset Z-Weather
Hold the button longer than 1.5 seconds and then release.
The LED blinks longer than when pressing the button once.
Z-Weather performs a factory reset and all configuration parameters are reset to their default values. Use this procedure only when the network primary controller is missing or otherwise inoperable.
Push the button 3 times within 1.5 seconds. If the LED is not blinking after releasing the button, Z-Weather has not enough energy and must be charged for several hours in bright sunlight.
Push the button 3 times within 1.5 seconds.
Push the button 3 times within 1.5 seconds. The LED blinks once indicating that Z-Weather is. Z-Weather sends a Z-Wave Wakeup-Notification if has been added to the network. If Z-Weather has not yet been added to the network, no action is performed.
Please note that this is a user manual Z-Weather from Z-Wave.Me is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Weather and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.