The following is an overview of the user manual for the Z-Wave product Zem (ZEM-1)from ZEM. To view other Z-Wave products and manuals from ZEM follow that link.
Overview
Security
As a Z-Wave Plus certified product, Zem supports Z-Wave S2 security. The following security modes are directly supported:
Features
ZEM describes Zem as having the following features:
- Color
- Switch Load Capacity Current
- Switch Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Operate the Controller APK (Android App.)
2. Click ""Setting""
3. Click ""LearnMode""
DC5V 2A, Always Power On. Not Sleeping.
You also can use manual to connect WIFI.
refer to : B. How to connect WIFI
1. Operate the Controller APK (Android App.)
2. Click ""Setting""
3. Click ""Inclusion""
1. Operate the Controller APK (Android App.)
2. Click ""Setting""
3. Click ""Exclusion""
Factory reset Zem
1. Operate the Controller APK (Android App.)
2. Click ""Setting""
3. Click ""ZW_SET_DEFAULT""
*If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network.
If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Zem from ZEM is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Zem and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.