Z-Wave ToolBox (ZWP-TBX) manual for Z-Wave

The following is an overview of the user manual for the Z-Wave product Z-Wave ToolBox (ZWP-TBX)from Z Wave Products Inc.. To view other Z-Wave products and manuals from ZWaveProducts follow that link.

  1. Overview
  2. Security
  3. Features
  4. Installation instructions


Z-Wave ToolBox
SKU Code
The Z-Wave Toolbox™ is a self-contained tool that enables the user to easily troubleshoot Z-Wave networks. Whether the problem is a range issue, interference, or device placement, the Z-Wave Toolbox™ will make troubleshooting a breeze…
The toolbox is a web-based, flexible tool that will work with any operating system, even smart phones and tablets. The toolbox contains 3 major applications, The Z-Wave Packet Analyzer, the Spectrum Analyzer, and the Network Health Tester.

The Z-Wave Packet Analyzer allows the user to see Z-Wave traffic. It helps troubleshoot connections, identify abnormal device operation, and pinpoint weak spots.

The Spectrum Analyzer allows users to scan frequencies close to Z-Wave frequencies for any interference.

Network Health Tester. This powerful tool can determine link stability, quality of service, latencies, and can help the user to
troubleshoot, optimize, and deploy Z-Wave networks with confidence.

Technical details:
Self-contained hardware that does not need computer to operate
• Connectivity - Ethernet, WiFi (AP and Client mode)
• Low power; it can run on batteries (battery pack sold separately)
• Power Adapter (12V/1A, 100-240VAC) • FCC and CE compliant
Version #
HW: 1 FW: 1.22:01.22 was the version certified
Certification #
Z-Wave Version


As a Z-Wave Plus certified product, Z-Wave ToolBox supports Z-Wave S2 security. The following security modes are directly supported:


    ZWaveProducts describes Z-Wave ToolBox as having the following features:

    • Firmware updatable via a compatible Z-Wave gateway
    • Color
    • Communications Connections
    • FLiRS capable
    • Supports Network Wide Inclusion
    • Supports Z-Wave Explorer Frames
    • Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via

    Installation instructions

    Network Health Tool:
    Select RESET on the Network Health Tool Device List widget. Be sure to delete the ToolBox from the Z-Wave controller.

    Network Health Tool:
    Using the Z-Wave controller you intend to troubleshoot, begin the inclusion process to add a new generic Z-Wave device. Select LEARN on the Network Health Tool Device List widget. The Z-Wave controller may include the ZWP-TBX as a generic scene controller or similar device; name the device according to your troubleshooting needs.

    Please note that this is a user manual Z-Wave ToolBox from Z Wave Products Inc. is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave ToolBox and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.