The following is an overview of the user manual for the Z-Wave product LED Bulb 6: Multi-White (ZWA001-C)from Aeotec. To view other Z-Wave products and manuals from Aeotec follow that link.
Overview
Tunable white: dimmable from 5% to 100%, tunable from 2700K to 6500K.
Possible to be included in groups, scenes, or schedules
Suitable for indoor lighting: Corridors, Bedroom, Living Room, etc.
Security
As a Z-Wave Plus certified product, LED Bulb 6: Multi-White supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Unauthenticated
Features
Aeotec describes LED Bulb 6: Multi-White as having the following features:
- Color
- Firmware updatable via a compatible Z-Wave gateway
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Remove for exclusion:
a) Set the Z-Wave network main controller into removing mode.
b) Led bulb re-power 3 times (between 0.5-2 seconds each time).
c) Wait a moment, the led bulb should be removed from the controller.Then the led bulb will flash once, dim to 5% first, and then increased to 100% after 5 seconds.
Add for inclusion:
a) Set the Z-Wave network main controller into adding mode.
b) Power cycle once for led bulb(OFF->ON).The led bulb will flash twice and send node info frame.
c) Wait a moment, the led bulb should be added to the controller.Then the led bulb will flash once when it has been included into the network.
Factory reset LED Bulb 6: Multi-White
Reset the device :
a) Please use this procedure only when the network primary controller is missing or otherwise inoperable.
b) Led bulb re-power 6 times (between 0.5-2 seconds each time); If the 6th power on, the led bulb flashes twice, which means that the resetting is successful.
Please note that this is a user manual LED Bulb 6: Multi-White from Aeotec is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have LED Bulb 6: Multi-White and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.