The following is an overview of the user manual for the Z-Wave product Secure Smart Plug 302 (SSP 302 UE)from Secure Controls. To view other Z-Wave products and manuals from Secure Controls follow that link.
Overview
Security
As a Z-Wave Plus certified product, Secure Smart Plug 302 supports Z-Wave S2 security. The following security modes are directly supported:
Features
Secure Controls describes Secure Smart Plug 302 as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To include the SSP 302 onto a network, put the controller into inclusion mode. Now, press and hold the button on SSP 302 for 4 to 7 seconds then release. The network status LED will start flashing (twice per second) on successful start of inclusion process.
On successful inclusion the LED will turn off.
To exclude the SSP 302 from a network, put the controller into exclusion mode. Now, press and hold the button on SSP 302 for 4 to 7 seconds then release. The network status LED will start flashing (twice per second) on successful start of exclusion process.
After successful exclusion the network status LED will start flashing once per second, and the device will reset to factory default.
Factory reset Secure Smart Plug 302
Please use this procedure only when the primary controller is missing or otherwise inoperable. Power cycle the device and press and hold the button for more than 11 seconds and less than 15 seconds within the 60 seconds of power cycle to put the device in factory default, that include setting all the configuration, Association to factory default and removing the device from Z-Wave network.
NA
NA
NA
Please note that this is a user manual Secure Smart Plug 302 from Secure Controls is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Secure Smart Plug 302 and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.