The following is an overview of the user manual for the Z-Wave product Ssp (SSP 301)from Secure Controls (UK). To view other Z-Wave products and manuals from Secure Controls follow that link.
Overview
The SSP 301 acts as a repeater in a Z-Wave network by helping messages from other devices reach there destinations.
Security
As a Z-Wave Plus certified product, Ssp supports Z-Wave S2 security. The following security modes are directly supported:
Features
Secure Controls describes Ssp as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
To include the SSP 301 onto a network, put the controller into inclusion mode. Now press and hold the button on SSP 301 for 4 to 7 seconds then
release. The network status LED will start flashing (twice per second) on successful start of inclusion process. On successful inclusion the LED will turn off.
To exclude the SSP 301 from a network, put the controller into exclusion mode. Now press and hold the button on SSP 301 for 4 to 7 seconds then
release. After successful exclusion the network status LED will start flashing once per second, and the device will reset to factory default.
NA
NA
NA
Factory reset Ssp
Please use this procedure only when the primary controller is missing or otherwise inoperable, Power cycle the device, press and hold the button
for 7-11 seconds within the 60 seconds of power cycle to put the device in factory default. It reset all configuration and association to factory default. It also removes the device from Z-Wave network.
Please note that this is a user manual Ssp from Secure Controls (UK) is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Ssp and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.