The following is an overview of the user manual for the Z-Wave product Motion Sensor (ZSE02)from Zooz. To view other Z-Wave products and manuals from Zooz follow that link.
Overview
Install and add the sensor to your Z-Wave controller in minutes. Enjoy Z-Wave Plus for faster and safer wireless communication. Choose from 2 powers sources: standard AAA batteries or micro USB power adapter.
Detection Radius: 110° / 16-23 feet
Power: DC 5V/1A or 4 AAA (1.2V) batteries
Power Consumption: < 15mA when idle / < 38mA when active
Range: Up to 100 feet line of sight
Operating Temperature: 14 °F to 122 °F
Operating Humidity: ≤ 80%
Installation and Use: Indoor only
Security
As a Z-Wave Plus certified product, Motion Sensor supports Z-Wave S2 security. The following security modes are directly supported:
Features
Zooz describes Motion Sensor as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Bring the motion sensor within 3 feet from your controller.
2. Put your Z-Wave controller in inclusion mode.
3. Press and release the Z-Wave button on the motion sensor TWICE quickly (to lock and unlock it).
4. A new motion detection device should appear on your controller's dashboard.
1. Bring the motion sensor within 3 feet from your controller.
2. Put your Z-Wave controller in exclusion mode.
3. Press and release the Z-Wave button on the motion sensor TWICE quickly (to lock and unlock it).
4. The device should disappear from your controller's dashboard.
Press and release the Z-Wave button on the motion sensor TWICE quickly (to lock and unlock it) to wake the device up for 10 seconds.
Factory reset Motion Sensor
If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To complete the reset process manually, please press the Z-Wave SIX TIMES quickly (3 lock-unlock cycles).
NOTE: All previously recorded activity and custom settings will be erased from the device’s memory.
Please note that this is a user manual Motion Sensor from Zooz is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Motion Sensor and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.