The following is an overview of the user manual for the Z-Wave product Paddle On/Off Switch (ZW303)from Zooz. To view other Z-Wave products and manuals from Zooz follow that link.
Overview
Security
As a Z-Wave Plus certified product, Paddle On/Off Switch supports Z-Wave S2 security. The following security modes are directly supported:
- S2 Unauthenticated
Features
Zooz describes Paddle On/Off Switch as having the following features:
- Switch Load Capacity Volt-Ampere
- Firmware updatable via a compatible Z-Wave gateway
- Switch Load Capacity Watts
- Switch Type
- Color
- Electric Load Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Inclusion the ZW303 from the existing Z-Wave home control network with your primary controller.
---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
---When prompted by your primary controller, click the Up or Down button three times in one second.
Exclusion the ZW303 from the existing Z-Wave home control network with your primary controller.
---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.
---When prompted by your primary controller, click the Up or Down button three times in one second.
Factory reset Paddle On/Off Switch
Press click Z-Wave button 2 times quickly,and hold for at least 10 seconds. to restore the device to the factory
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Please note that this is a user manual Paddle On/Off Switch from Zooz is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Paddle On/Off Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.