The following is an overview of the user manual for the Z-Wave product Valve Control (ZAC03)from Zooz. To view other Z-Wave products and manuals from Zooz follow that link.
Overview
- Indoor installation only!
- Adjustable bracket fits all standard ball valves.
- Compatible with standard Z-Wave home automation systems supporting binary switch command.
- Z-Wave Plus with improved 500 chip for faster and safer wireless communication.
- Built-in Z-Wave signal repeater.
Security
As a Z-Wave Plus certified product, Valve Control supports Z-Wave S2 security. The following security modes are directly supported:
Features
Zooz describes Valve Control as having the following features:
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Plug the valve control in within 3 feet from your controller.
2. Put your Z-Wave controller in inclusion mode.
3. Press the red power button on the valve control THREE times quickly.
4. A new on-off device should appear on your controller's dashboard.
1. Plug the valve control in within 3 feet from your controller.
2. Put your Z-Wave controller in exclusion mode.
3. Press the red power button on the valve control THREE times quickly.
4. The device should disappear from your controller's dashboard.
Factory reset Valve Control
If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To complete the reset process manually, please press and hold the red power button for 10 seconds. The LED indicator on the device will flash to indicate the process has been successfully completed.
NOTE: All previously recorded activity and custom settings will be erased from the device’s memory.
MANUAL OPERATION:
In case of power failure, device malfunction, or other emergency,
you may need to manipulate valve handle manually: pull and hold
the clutch down while simultaneously turning the rocker arm to
the side to open or close valve.
Please note that this is a user manual Valve Control from Zooz is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Valve Control and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.