The following is an overview of the user manual for the Z-Wave product Z-Wave Mini Plug (ZEN07)from Zooz. To view other Z-Wave products and manuals from Zooz follow that link.
Overview
- Local and remote on/off control of lamps and small appliances
- Energy monitoring in live mode or over time (your Z-Wave gateway needs to support this feature)
- Scene inclusion for custom automation scenarios when included to a Z-Wave gateway controller
- Advanced configuration to customize LED indicator display and Z-Wave button functionality
- Automatic status recovery after power outage
- Timer option to turn off the device automatically (your Z-Wave gateway needs to support this feature)
- Z-Wave Plus with improved 500 chip for faster and safer wireless communication
- Built-in range extender for a stronger, more reliable network
- Super small size – easily fits two in a standard double receptacle
Specs:
Model Number: ZEN07
Z-Wave Signal Frequency: 908.42 MHz
Power: 110V, 60Hz
Maximum Load: 13A
Power consumption: 0.13W
Operating Temperature: 32 – 104 F
Range: Up to 100 feet line of sight
Installation and Use: Indoor only
Dimensions: 1 ¾“ (diameter) x 1 1/8”
Weight: 1 ½ oz
Security
As a Z-Wave Plus certified product, Z-Wave Mini Plug supports Z-Wave S2 security. The following security modes are directly supported:
Features
Zooz describes Z-Wave Mini Plug as having the following features:
- Color
- Electric Load Type
- Switch Load Capacity Current
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
1. Plug the Mini Plug into a grounded receptacle
2. Put your Z-Wave controller into exclusion mode
3. Press and release the Z-Wave button 3 TIMES quickly. The LED indicator will flash pink
4. The smart plug should disappear from your controller's device list
If the first attempt is unsuccessful, please repeat the process following all steps carefully.
1. Plug the Mini Plug into a grounded receptacle within the range of your Z-Wave network
2. Put your Z-Wave controller into inclusion mode
3. Press and release the Z-Wave button on the Mini Plug 3 TIMES quickly. The LED indicator will flash green. It will turn solid green once the process has been completed
4. A new on / off device should appear on your device list
Troubleshooting Tips
If you are unable to include the Z-Wave Mini Plug to your controller, please try one of the following:
- Bring the Mini Plug closer to your Z-Wave controller or use a hand-held secondary controller to perform inclusion
- Once in inclusion mode, press and release the Z-Wave button quickly 5-6 TIMES to ensure the command has gone through
- Put your controller into EXCLUSION mode. Press and release the Z-Wave button quickly 3 TIMES, and then try adding it to your network again
Factory reset Z-Wave Mini Plug
When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. To complete the process, plug the Mini Plug into a grounded receptacle, then PRESS AND HOLD the Z-Wave button for AT LEAST 10 SECONDS until the LED indicator flashes red. Release the button. NOTE: All previously recorded activity and custom settings will be erased from the device’s memory.
Please note that this is a user manual Z-Wave Mini Plug from Zooz is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave Mini Plug and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.