The following is an overview of the user manual for the Z-Wave product Z-Wave Plus Power Switch (ZEN15)from Zooz. To view other Z-Wave products and manuals from Zooz follow that link.
Overview
Local and Z-Wave wireless control of your favorite home appliances like microwaves and refrigerators.
Energy monitoring in live mode or over time (your Z-Wave gateway needs to support this feature).
Scene inclusion for custom automation events when included to a Z-Wave gateway controller.
On/Off status recovery after power failure.
LED indicator to display Z-Wave signal strength and power usage for the connected device.
Added security with AES signal encryption (requires a security enabled gateway controller for full functionality).
Z-Wave Plus with improved 500 chip for faster and more reliable wireless communication.
Built-in range extender.
SPECIFICATIONS:
Model Number: ZEN15
Z-Wave Signal Frequency: 908.42 MHz
Power: 120V, 60Hz
Maximum Load: 15A, 1800W, ½ HP
Operating Temperature: 14° – 104° F
Range: Up to 130 feet line of sight
Installation and Use: Indoor only
Dimensions: 20” (with cord) x 2.6” x 1.1”
Weight: 10oz
Security
As a Z-Wave Plus certified product, Z-Wave Plus Power Switch supports Z-Wave S2 security. The following security modes are directly supported:
Features
Zooz describes Z-Wave Plus Power Switch as having the following features:
- Color
- Electric Load Type
- Switch Load Capacity Current
- Switch Load Capacity Watts
- Supported Meter Type
- FLiRS capable
- Supports Network Wide Inclusion
- Supports Z-Wave Explorer Frames
- Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via
Installation instructions
Please include the Power Switch to your network BEFORE connecting it to the appliance you wish to control.
Auto Z-Wave Inclusion:
1. Put your Z-Wave controller into inclusion mode
2. Plug the Power Switch into a grounded receptacle located within direct range from your Z-Wave gateway controller
3. The LED indicator will start flashing blue, then turn blue (on) or pink (off) once included
4. A new on / off device will be recognized by your Z-Wave controller
Manual Z-Wave Inclusion:
1. Plug the Power Switch into a grounded receptacle located within direct range from your Z-Wave gateway controller
2. Put your Z-Wave controller into inclusion mode
3. Press and release the Z-Wave button 3 TIMES QUICKLY
4. The LED indicator will start flashing blue, then turn blue (on) or pink (off) once included
5. A new on / off device will be recognized by your Z-Wave controller
Secure Z-Wave Inclusion:
1. Plug the Power Switch into a grounded receptacle located within direct range from your Z-Wave gateway controller
2. Put your Z-Wave controller in secure inclusion mode
Press and HOLD the Z-Wave button for at least 3 seconds
3. The LED indicator will start flashing green, then turn blue (on) or pink (off) once included
4. A new secure on / off device will be recognized by your Z-Wave controller
1. Plug the Power Switch into a grounded receptacle located within direct range of your Z-Wave gateway controller
2. Put your Z-Wave controller into exclusion mode
3. Press and release the Z-Wave button 3 TIMES QUICKLY
4. The LED indicator will start flashing orange, then turn blue (on) or pink (off) once excluded
5. The Power Switch will disappear from your controller's device list. The LED indicator will remain solid orange for a few seconds to indicate exclusion
If the first attempt is unsuccessful, please repeat the process following all steps carefully.
Controls 110 V appliances with high input surge current (power draw at start-up) such as motors, pumps, refrigerators, and window AC units (rated at or below 15 A / 0.5 HP)
Factory reset Z-Wave Plus Power Switch
When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, plug the Power Switch into a grounded receptacle, then PRESS AND HOLD the Z-Wave button for AT LEAST 20 SECONDS. The LED indicator will flash orange and then stay solid orange for 2 seconds to indicate successful reset. The Power Switch will then turn off.
NOTE: All previously recorded activity and custom settings will be erased from the device’s memory. You may only reset your Power Switch once it has been included to a Z-Wave network.
Please note that this is a user manual Z-Wave Plus Power Switch from Zooz is provided as is and without warranty; all information contained herein is provided by the manufacturer or the certifying body. The information provided is for reference only and is not intended to be used as a substitute for professional advice. ZWaveProducts.com only warrants and is only able to support products purchased directly from us. If you have Z-Wave Plus Power Switch and have not purchased it from us, please contact the manufacturer directly with any further questions you may have.